How UWB module positioning technology realizes positioning

      2022-06-16 738

      How does UWB module positioning technology achieve positioning? Do you know the technical nature of UWB? It is actually a new type of wireless communication technology, based on the immediate adjustment of impulse pulses with very steep rise and fall times, so that the signal has a bandwidth of the gigahertz. This type of technology solves the major problems related to the communication level that have puzzled traditional wireless technology for many years. It has the characteristics of insensitivity to channel fading, low power spectral density of transmitted signals, low interception capability, low system software complexity, and can produce several centimeters. positioning accuracy and other advantages. Therefore, it will be used in the positioning level more at this stage. At this stage, the key of UWB module positioning is based on three positioning algorithms: TOF ranging positioning, TDOA positioning, and AOA positioning. So how is UWB module positioning achieved? The following editor will give you a detailed introduction.

      How UWB module positioning technology realizes positioning

      UWB module positioning technology: TOF positioning, TDOA positioning, AOA positioning three UWB positioning technologies.


      1. Positioning TOF

      TOF positioning is to calculate the position after the ranging is completed, and initiate ranging with the ranging method, tag and each base station that needs to be positioned. In zero-dimensional mode, only one base station is required for ranging. In one-dimensional mode, at least one base station is required for ranging. In two-dimensional mode, distance measurement with at least three or more base stations is required, and in special mode, distance measurement with two base stations is possible. 3D requires distance measurements with four base stations.


      2. Positioning TDOA

      TDOA is positioning based on time difference of arrival, which requires accurate time synchronization in the system. There are two types of time synchronization, one is wired time synchronization, the wired time synchronization can be controlled within 0.1ns, and the synchronization accuracy is very high, but due to the wired time, all devices either use the central network or cascade, but the increase The complexity of network maintenance also increases the complexity and cost of construction. In addition, there is a special wired time synchronizer, which is expensive.


      The other is wireless synchronization. Wireless synchronization can generally reach 0.25ns, and its accuracy is slightly lower than that of wired synchronization, but its system is relatively simple. Base station positioning only requires power supply, and WiFi can be used for data backhaul, effectively reducing costs. After base station time synchronization, the tag will send a broadcast report. After the base station receives it, the tag receives the timestamp of the newspaper and sends its content to the computing server. The calculation server locates the time stamp of the newspaper to other base stations, and calculates the specified position.


      3. Positioning AOA

      AOA positioning usually calculates the angle of arrival based on the method of phase difference. In general, it is not used alone. Since AOA involves angular resolution, if a simple AOA is used for positioning, the further away from the base station, the worse the positioning accuracy. AOA can locate with TOF during ranging. In this mode, positioning can be done by a single base station, or two base stations can be achieved by AOA.


      UWB module positioning technology implementation process:

      1. Repeat each positioning tag to send data frame with UWB pulse

      2. The positioning base station receives the UWB burst sent by the positioning tag

      3. Each positioning base station measures the time when the data frame of each positioning tag arrives at the receiver antenna, and adopts a high-sensitivity short-pulse detector.

      4. Realize communication between positioning base station and background server through WIFI or Ethernet

      5. The positioning engine refers to the calibration data sent by the tag, determines the time difference between the tag reaching different positioning base stations, and uses the TDOA algorithm to calculate the position of the tag.

      6. Terminal equipment (application software) that displays the location of the positioning label


      久久国产综合精品SWAG蓝导航| 无码精品人妻一区二区三区免费看| 国产亚洲美女精品久久| 国产精品乳摇在线播放| 99久久免费看国产精品| 午夜精品久久久久久久久| 亚洲码国产精品高潮在线| 亚洲国产精品视频| 国产日韩美国成人| 美日韩一区二区三区| 亚洲人午夜射精精品日韩| 日韩精品视频在线观看免费| 国产精品福利影院| 国产精品露脸国语对白河北| 热99re久久免费视精品频软件| www亚洲精品久久久乳| 精品少妇人妻AV一区二区| 亚洲最大天堂无码精品区| 999久久久无码国产精品| 91精品福利一区二区| 国产三级精品三级在专区中文| 国产精品自拍一区| 97精品久久天干天天天按摩| 国产亚洲精品成人AA片| 久久久这里有精品| 国产日韩精品SUV| 精品国产精品国产偷麻豆| 亚洲第一精品在线视频| 无码国内精品久久人妻蜜桃| 亚洲精品视频在线| 久久精品人人做人人妻人人玩| 久久精品国产亚洲精品2020| 91在线老王精品免费播放| 亚洲精品一区二区三区四区乱码| 精品亚洲AV无码一区二区三区| ...91久久精品一区二区三区| 91精品免费高清在线| 国产精品三级在线| 亚洲精品无码久久久久秋霞| 国产精品无码一区二区在线| 国产精品嫩草影院线路|